Daytona L4-135 2.2L SOHC (1984)
FIGURE 4
7.
Connect the single male blade connector with double crimped 14DB lead on the new ignition switch drop-out wiring assembly, PN 4368729, to
the connector disconnected from the A/C cut-out relay or untaped from the main harness. Fold back and tape connection securely (Figures 2 and
4).
a.
A/C equipped cars:
Connect the remaining 1-way female connector on the dark blue J-2 wire of the new PN 4368729 harness to the A/C cut-out relay.
b.
Heater-only cars:
Loop and tape the remaining 1-way female connector on the dark blue J-2 wire of the new PN 4368729 harness to the opposite shorter blue wire on
the same harness after first taping over end of insulator.
